Memorex RX 1 Smart Manual de Instalação descarregar pdf (Página 124)

Simrad MX500 | 123

LORAN-C Integration

The MX500 has two selections for Loran-C integra-

tion (Raytheon and Locus). This feature will be avail-

able when the Loran-C license is activated. Please copy

the PCB & part number and call SIMRAD to obtain the

license.

Raytheon

To implement this feature, change LORAN-C connected to

Yes.

Identify the appropriate input port (1 or 2) that the

LORAN-C device connects to by using the Change soft-

key.

Select the appropriate Version Number with the range

from 0 to 9.

The Antenna offset option of the LORAN-C feature is tied

to the Antenna offset from the GPS feature. Note that

any changes you make to the Antenna offset in LORAN-C

will also modify the Antenna offset in the CFG1/GPS

screen. The Antenna offset allows you to virtually off-

set your antenna. That is, if you are forced to place the

antenna in a location other than where you want your

position fix calculated (due to superstructure or other

high power antennas), you can place the antenna in a

practical location. Enter the appropriate Antenna offset,

and the receiver will calculate your position in the place

where you would have preferred to place the antenna.

After the LORAN-C (Raytheon) feature is enabled, you

will have 3 new screens (POS 4, POS 5, POS 6), which

display the following information:

POS 4 - GPS/LORAN-C Combined Position •

POS 5 - LORAN-C Calibrated Position •

POS 6 - LORAN-C Stand Alone Position •

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 261 262

Sem comentários

Memorex RX 1 Smart Manual de Instalação Página 124