Memorex RX 1 Smart Manual de Instalação descarregar pdf (Página 129)

128 | Simrad MX500

Lighting - Display/Keyboard Light & Contrast

Control

There are two basic display setups. The light function key

allows you to instantly switch between two predefined

screens (Daylight & Nightlight).

Log - Speed Log Input (Pulse or NMEA 0183)

This screen controls the input port (NMEA-0183 or Pulse)

and format of the speed log input to the receiver. In the

default condition, the speed log is not connected. NMEA

0183 speed is accepted from the xxVHW data sentence

originating in any of the version 1.5, 2.0, 2.1, or 2.3

format where xx is a valid talker ID as specified in the

NMEA 0183 standard. The receiver will also accept speed

log pulse input, with pulses of up to 1.5 kHz. Refer to the

Installation section of this manual for the wiring interface

instructions.

NMEA 0183 /VHW) Input Screen Pulse Input Screen

NMEA Input

Data Input Port No. - Select the appropriate NMEA input

port as determined by the hardware interface. Refer to

the Appendix F of this manual for wiring connections.

Alarm If No Data - Causes an alarm to activate if data is

not received on the port you defined within 10 seconds

when Yes is selected (the default condition). To disable

the alarm, select No with the Change softkey.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 261 262

Sem comentários

Memorex RX 1 Smart Manual de Instalação Página 129