Memorex RX 1 Smart Manual de Instalação Página 23

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 22
22 | Simrad MX500
level for dropping DGPS corrections is 600 seconds.
During this period, your positioning information is less
than optimal, and position accuracy may be off by as
much as 3 to 5 meters. Press the GPS function key and
refer to the DGPS section in this manual for guidance if
this light condition occurs.
Yellow Solid
DGPS position update with poor HDOP value. You
may see this from time to time during normal opera-
tion. It usually occurs when you are tracking 3, 4, or 5
satellites, and the satellites have poor geometry rela-
tive to your position. The condition will normally go back
to Green Solid when it picks up another satellite or the
geometry of the existing satellites improves. The fac-
tory default level for this indication is with an HDOP of 4
to 10. During this period, your positioning information is
less than optimal, and position accuracy may be off by as
much as 5 to 10 meters. You can press the GPS function
key and refer to the GPS section in this manual for guid-
ance if this light condition occurs.
Green Solid
DGPS position update with HDOP value less than 4.
This is the normal operating condition. Position accuracy
is normally better than 3 meters. Keep in mind that posi-
tion accuracy is always only as good as the corrections
received, their age, your distance from the reference
station, and the geometry of the satellites. This is the
normal operating condition and no icon will be displayed.
GPS Trafc Light Operation:
Red Flashing
Not tracking satellites (no position update). This
is normal for the first 2 minutes or so when turning the
unit on. The very first time you turn the unit on, or if
the memory is reset or lost, this condition is also nor-
mal. Allow the receiver to run for at least 30 minutes
under these circumstances. If it still does not change
to Red Solid, refer to the troubleshooting section in the
Installation section of this manual.
Vista de página 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 261 262

Comentários a estes Manuais

Sem comentários