Memorex RX 1 Smart Manual de Instalação descarregar pdf (Página 134)

Simrad MX500 | 133

Distance:

Passing the waypoint is determined by reaching an imagi-

nary circle around the waypoint, the radius of which you

can define in WPT Pass Distance. The default value is

0.10 Nm.

If you set this distance to 0.00, you will never pass the

waypoint. This is a great way to perform station keeping

maneuvering. Refer to the Plot Screen Use Examples in

the Plot section for further details on this application.

Bisector Line:

Passing the waypoint is determined by reaching the

bisector line of an acute or obtuse angle between your

present course line and the next leg of your route.

Perpendicular Line:

Passing the waypoint is determined by reaching an imagi-

nary perpendicular line from your present course line.

Approach Alarm:

Causes an alarm to sound if your position is within the

radius defined in Approach Distance (below) when Yes

is selected. To disable the alarm, select No (the default

condition) with the Change softkey.

Approach Distance:

Sets the waypoint approach alarm distance (above) to

sound if your position is within the radius defined. The

default setting is 0.30 Nm. This is a convenient tool for

large boats and ships that need to perform Transfer and

Advance maneuvers prior to reaching the waypoint.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 261 262

Sem comentários

Memorex RX 1 Smart Manual de Instalação Página 134