Memorex RX 1 Smart Manual de Instalação descarregar pdf (Página 138)

Simrad MX500 | 137

ensure that you don’t lose data due to lack of throughput

on the data port.

Total load is - Due to the throughput limitation of the

NMEA 0183 standard, you can not turn on all of the

output records available from the receiver at a once per

second output rate at one time. The “Total load” counter

will help you maximize the port usage on the receiver. It

monitors the total throughput capability of all the out-

put records that are currently turned on. If you go over

100% and you require all of the data records that are

currently turned on, try reducing the Output Rate for one

or more of the less critical data records. Continue this

process until the Total load is 100.0% or less.

There are several special case screens which provide

added support.

Rnn - Active Route Data Record:

The NMEA-0183 standard allows you to output the active

route with an ID sentence that begins either as GPR00 or

GPR01. Some of the equipment you might interface may

require this sentence to outputs R00 and other equip-

ment may require this data record as R01. The receiver

allows you to configure the ID either way (R00 is the

default).

WPL - Waypoint Location Data Record:

The receiver outputs all of the waypoints in the active

route. If you want to output the complete Waypoint

Bank, simply high light the Send All softkey then press

ENT from the NMEA WPL screen.

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 261 262

Sem comentários

Memorex RX 1 Smart Manual de Instalação Página 138