Memorex RX 1 Smart Manual de Instalação descarregar pdf (Página 52)

Simrad MX500 | 51

Don’t forget to press the 6 EDIT key to end your

editing.

Insert New Waypoint

The following example assumes RTE1 is empty. Follow

the directions in the Erasing an Existing Route section to

start with an empty route if you have waypoints in the

RTE1 screen.

Select the 1 RTE key until the RTE1 screen is dis-

played.

Press the EDIT key to enter the edit mode.2

Highlight 3 Insert softkey from the display and press

ENT. Skip to the next step if RTE1 is empty.

Highlight Insert new Waypoint softkey from the 4

display and press ENT.

Choose either 5 Bearing, Distance or Lat/Lon (Grid

Point, or TD if you are using other coordinate sys-

tems). Use the EDIT keypad to type in the range

and bearing from the previous waypoint (or pres-

ent position in the case of the rst waypoint) or

the coordinates you want and their appropriate

description.

When the information is correct, highlight the 6 Done

softkey and press ENT.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 261 262

Sem comentários

Memorex RX 1 Smart Manual de Instalação Página 52