Memorex RX 1 Smart Manual de Instalação descarregar pdf (Página 67)

Keypad & Display Description | 65

User GRID

User defined grids is an optional feature of the MX51x. When enabled you can set the

receiver to provide Easting and Northing position data based on a local grid. The grid

function is set up in the CFG1 Position screen. A special license is required to activate

this special feature.

POS2 - Position, Altitude, Magnetic Variation, & Time

This screen is divided into three windows. The upper left window provides your position

coordinates, the antenna altitude (above Mean Sea Level - MSL), altitude mode (2D or

3D), the magnetic variation (Variation) for your present position, and the present datum

in use for calculating your position.

The lower left window displays your course and speed over ground. If the degree symbol

has a small ‘c’ under it, this indicates that the magnetic variation and compass deviation

table are being calculated and displayed. Refer to the CFG1 Compass section for more

details on how to set this up.

The right hand window indicates today’s date and time. This setup is in the CFG1 Time

menu. It can be set for UTC time, local 12 hour time, or local 24 hour time. There is an

added summer/winter feature to help you remember which direction to set the clock for

day light savings in the summer.

There are no editing capabilities in this screen.

POS3 - Position & Log

This screen is divided into three windows. The upper left window is the same as POS2 and

provides: your position coordinates, the antenna altitude (above Mean Sea Level - MSL),

altitude mode (2D or 3D), the magnetic variation (Variation) for your present position, and

the present datum in use for calculating your position.

The lower left window is also the same as POS2 and displays your course and speed

over ground. If the degree symbol has a small c under it, this indicates that the magnetic

variation and compass deviation table are being calculated and displayed. Refer to the CFG

Compass section for more details on how to set this up.

The right hand window indicates your accumulated mileage since the CDU was first turned

on.

You will also find two Trip Reset softkeys if you press the EDIT key. Two trip logs are

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 199 200

Sem comentários

Memorex RX 1 Smart Manual de Instalação Página 67