Memorex RX 1 Smart Manual de Instalação descarregar pdf (Página 95)

Keypad & Display Description | 93

Time Offset: Sets the local offset to UTC time. 0:00 is the default.

Summer Time: Sets the local clock ahead one hour in the summer for daylight savings

time when set to Yes, or to the Local Offset time when set to No.

The adjusted time value is displayed in the lower window so you can verify the current

time without having to leave the screen.

USB - USB Mass Storage Conguration

This option controls the saving and restoring of your waypoints, routes, and system

configuration via an external USB device. In the event where you do a software upgrade

for your MX51x CDU for example, all your waypoints, routes, and system configuration

will be lost. This option allows you to save them to a USB device (i.e. USB flash drive)

beforehand, and restore them from your USB device after the software upgrade is

completed. This way, you do not have to manually re-enter all your waypoints, routes,

and system configuration settings.

To implement this feature, plug your USB device into the USB port of the MX51x CDU

first, and change USB Connected to Yes. Allow a few moments for the CDU to read and

detect your USB device. Ensure that status displays Connected before continuing.

Select the data type, either Waypoints, Routes, Config, or All by using the Change

softkey.

Waypoints:

This sets the CDU to save (Save to USB softkey) or restore (Restore softkey) your

waypoints using your USB device.

Routes:

Select routes will set the CDU to save (Save to USB softkey) or restore (Restore

softkey) your routes using your USB device.

Config:

Allows the CDU to save (Save to USB softkey) or restore (Restore softkey) your

system configuration settings using your USB device.

All:

Allows the CDU to save (Save to USB softkey) or restore (Restore softkey) your

waypoints, routes, and system configurations all at once.

If you are nished using this feature and wanted to remove your USB device from the

CDU, ensure that USB Connected is changed to No and press the EDIT key once more to

exit EDIT mode before removing the device.

Please format your USB device using FAT32 le system before use. Refer to the

Installation section for fomatting procedure and hardware compatibility list.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 199 200

Sem comentários

Memorex RX 1 Smart Manual de Instalação Página 95